Polaroid Direct Connect Adapter Manuel d'utilisateur télécharger pdf (Page 21)

Possible cause Solution

Adapter does not print

Possible cause Solution

Computer communication baud rate

too high

Manually select a low baud rate:

At the main window, click

the Settings button.

On the Baud Rate list,

click 19200 or 9600.

Click the OK button.

Other condition as shown by the LED

indicator

See Computer connection codes

(page 25).

No film in printer (flashing orange

adapter LED)

Insert a new pack of film (Figure 9 on

page 20).

Direct Connect adapter not properly

connected to camera and printer

Check the connections as described

on page 18, and verify that the

adapter LED and the printer LED are

both on.

Camera not powered on Verify that the camera is on. See the

camera instructions if necessary.

Camera not in Connect mode Verify that the camera is in the Con-

nect mode before pressing the print

button on the adapter. See the camera

instructions if necessary.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 33 34

Pas de commentaire

Polaroid Direct Connect Adapter Manuel d'utilisateur Page 21