Polaroid MicroCam Manuel d'utilisateur

MicroCamUser Guide(ENGLISH VERSION)

Exposure too short or too longThe camera will make automatic exposuresas short as 1/60 second. If the microscopeillumination is too bright, the camera

Xenon lightingIf using a Xenon (daylight) microscopeilluminator with color film, set the camerafor Type 331 black & white film, toremove the built

Microscope parts (17)a Phototube eyepieceb Phototubec Viewing eyepieced Revolving nosepiecee Objective lensf Specimeng Specimen stageh Substage conden

4 Align the substage condenser bycentering the image of the fielddiaphragm, using the condenser’s radialcentering screws (21). If necessary,refocus th

Possible problems and causesVignetting (dark corners of print): Themicroscope may not be adjusted forKoehler illumination; the field diaphragmmay not

FCC Notice (U.S.A. only)Warning: This equipment generates,uses, and can radiate radio frequencyenergy and if not installed and used inaccordance with

Polaroid Service Centers and OfficesCaliforniaPolaroid Corporation3232 West MacArthur BoulevardP.O. Box 25200Santa Ana 92799-5200Tel: (714) 641-1200Ge

1 23465331 337 339OIAm+–jabcdefhgiknlmo

1339+–78910 11 1213 14 1516x 4.0 x 2.0 x 1.0 x .50 x .25

17 18192021 22 236OFF23.54nmp oabcdefghijlqkr

IntroductionThe Polaroid MicroCam is designed toprovide instant photographic capability toa wide variety of light microscopes. Thecamera is simple to

The numbers throughout the text refer tothe illustrations at the back of the book.The camera (Illustration 1)a Film holderb Film door latchc Control p

The control panel (6)k Automatic/manual selector: Press tohighlight the desired mode (Automatic/manual).lON/OFF switch (O/l).m Film selector: Press re

Load the film1 Release the latch to open the film door(7). Check that the steel developer rollersare clean before loading the film. Cleanthe rollers w

Operation1 Place the specimen on the microscopefocusing stage, and focus and frame theimage.2 Adjust the microscope illumination forphotography; Koehl